• Adjust the electronic view finder to your preferred angle (up to 90 degrees).
#Caution
• You cannot use an external flash and the electronic view finder at the same time.
• When carrying the camera, do not hold it by the electronic view finder. The camera may separate from the electronic view finder and drop.
• Do not leave the camera with the electronic view finder attached in a location subject to direct sunlight.
Slide off the hot shoe cover.
2
Turn off the camera.
1
• Keep the shoe cover in a safe place to avoid losing it.
3 Remove the connector cover from the electronic view finder.
4 Align the electronic view finder with the hot shoe on the camera body, and slide it in until it stops.
• Insert the electronic view finder by pushing on its lower part. 5 Turn on the camera.
6 Each press of the ubutton switches between the monitor display and electronic view finder display.
• You can adjust the brightness and color temperature of the electronic view finder. g “EVF ADJUST” (P. 74)
7 Turn the diopter adjustment ring to a position where the image on the
11 viewfinder can be seen clearly.
Using electronic view finder (sold separately)
If you use the electronic view finder (sold separately: VF-2), you can view the shooting screen in the finder. This is convenient when you are in a very bright location, such as under direct sunlight, where it is difficult to view the monitor, or are using the camera at a low angle. Also refer to the electronic view finder’s manual.
Information