With this camera, you can use one of the separately sold external flash units to achieve a flash suited to your needs. The external flashes communicate with the camera, allowing you to control the camera's flash modes with various available flash control modes, such as
An external flash unit specified for use with this camera can be mounted on the camera by attaching it to the camera's hot shoe. You can also attach the flash to the flash bracket on the camera using the bracket cable (optional). Refer to the documentation provided with the external flash units as well.
Functions available with external flash unitsOptional flash | |||||||
Flash control | |||||||
mode | FP TTL AUTO, FP MANUAL | MANUAL |
| MANUAL | |||
GN (Guide | GN50 | GN36 | GN20 | GN14 |
|
| |
(85mm*) | (85mm*) | GN11 | GN22 | ||||
number) | |||||||
GN28 | GN20 | (35mm*) | (28mm*) | ||||
(ISO100) | (24mm*) | (24mm*) |
|
|
|
| |
|
|
|
|
| |||
RC mode |
|
| – | – | – | – |
* The focal length of the lens that can be used (Calculated based on 35 mm film camera).
Wireless remote control flash photographyExternal flash units that offer a remote control mode and are designated for use with this camera can be used for wireless flash photography. The
Position the wireless flash units with their remote sensors facing the camera. The following illustration shows the approximate ranges at which the flash units can be positioned. The actual control range varies with local conditions.
#Caution
50°
100°30°
10m
5m
11
Information
•If [ON] is selected for [#RC MODE], photographs can only be taken with a wireless flash.
EN 103