Images recorded in RAW data cannot be printed.

You cannot print movie images.

The camera will not enter sleep mode while it is connected to the USB cable.

Connecting the camera to a printer

Use the provided USB cable to connect the camera to a PictBridge-compatible printer.

1 Turn the printer on and connect the camera's multi-connector to the printer's USB port with the USB cable.

For details on how to turn the printer on and the position of the USB port, refer to the printer's manual.

 

Multi-connector

Smaller terminal

 

 

 

USB cable

 

 

Look for this mark.

 

 

USB port

 

 

 

2 Turn on the camera.

 

 

8

• The selection screen for the USB connection is displayed.

 

3 Use FGto select [PRINT].

USB

Printing

STORAGE

• [ONE MOMENT] is displayed and the camera and

 

printer are connected. Go to “Custom printing” (P. 85).

MTP

 

PRINT

 

#Caution

 

 

 

EXIT

pictures

• If the screen is not displayed after a few minutes,

SET

Easy printing

 

 

disconnect the USB Cable and start again from Step 1.

 

1 Use HIto display the pictures you want to print on the camera.

Display the image you want to print on the camera and connect the camera with a printer using a USB

cable.

 

EASY PRINT START

2 Press I.

 

PC/CUSTOM PRINT

 

 

The picture selection screen appears when printing is completed. To print an- other picture, use HIto select the image and press the ibutton.

To exit, unplug the USB cable from the camera while the picture selection screen is displayed.

84EN