EN 17

En

Remove the filter from the digital camera

If a filter is attached to the lens of the digital camera, remove the filter before loading t he digital camera
in the Case.
Prepare the digital camera.

Compatible digital camera?

This product (PT-E03) is exclusively for use with the E-410/E-400 Digital Camera.

Checking camera operation

Refer to the digital camera’s instruction manual for details on how to make sure the camera is op erating
correctly.
Open the Case.
1Open the two buckles on the Case.
CAUTION:
The digital camera cannot be loaded in the Case while the filter is attached to the lens. Be sure to remove the
filter before loading.
2Move the attached O-ring remover hook as according to
the drawing on the right.
1Insert the hook section below the buckle open/close
lever.
2Slowly pull the O-ring remover.
3If the O-ring remover is not available, push the buckle
lock/unlock lever from the left and right with your thumb
and index finger, and pull up the lever gently.
PT-E03_EN.Book Page 17 Tuesday, March 20, 2007 7:21 PM