10
Operating the MAUSB-10
The operating procedures for the MAUSB-10 under Windows are described below.
1 Connecting to the computer <98/98 SE/Me
⽧
Operation>
After installing the device driver, connect the MAUSB-10’s connector to the USB port on your computer. (You
can plug in the USB connector while the computer is in use.)
[Notes]
•Be sure to connect the MAUSB-10 to your computer AFTER installing the device driver.
•Make sure the connector is fully inserted.
•When inserting the connector, make sure it is oriented correctly (refer to the pictures below). Inserting the
connector incorrectly may damage the connector and/or the computer’s USB port.
USB port
(Type A)
The computer’s
USB port has a
mark over it.