Olympus MAUSB-10 3 Install the device driver

41
3 Install the device driver <Mac OS X⽧Install>
When using the MAUSB-10 for the first time, you must first install the device driver included on the
provided CD-ROM.
1. Double-click the “OLYMPUS” icon.
2. Double-click the “MAUSB-10” folder.
5. The window at right appears.
Click the lock icon next to “Click the lock to make
changes”.
4. Double-click “USB Reader_Writer. pkg”.
Before installation, make sure that:
•Your computer is turned on.
•The provided CD-ROM is loaded properly.
•All applications are closed.
•The MAUSB-10 is NOT connected to the
computer’s USB port.
Then, follow the steps below to install the driver on
your computer.
(*Note that the windows shown below may look different
on your computer, depending on how your operating
system is configured.)
[Notes]
•Be sure not to connect the MAUSB-10 to the
computer until installation of the device
driver is completed.
•It is not possible to uninstall the device driver
in Mac OS X.
Do not connect to the computer before installation.
3. Double-click the “Mac OS X” folder.