Setting the Zoom Lever
When loading the digital camera in the Case, fit the projecting part of the zoom lever of the digital camera into the recessed part of the zoom lever on the inside of the Case.
CAUTION : • When loading the camera, confirm that the projecting part of the zoom lever of the camera is properly set to the recessed part of the zoom lever of the Case.
•When the setting is insufficient, the loading of the camera becomes imperfect and it may not be possible to seal the Case or zooming may not function. Insufficient sealing will cause water leakage.
Power Switch Operation Method
Power switch operation is possible by operating the power switch lever of this Case corresponding to the power switch lever of the digital camera in the Case.
Note: • When the set time (initial setting: 3 minutes) passes without any operation while the digital camera is installed in shooting mode, the camera enters into sleep mode (standby status) and the operation stops.
To cancel sleep mode (return to operation status), press the shutter button or any other button.
For details, refer to the instruction manual for the digital camera.