Open the Case.
Insert the buckle opener of the accessory into the buckle opening lever as shown in the figure (in direction 
) Pull the buckle opener slowly (in direction ②). When not using the buckle opener, hold the buckle opening lever with your thumb and index finger from the side and pull it up slowly.
①�
②�
Pull the mode dial of the Case.
Pull the mode dial of the Case until it stops, so that it does not interfere with the mode dial of the digital camera.
Load the digital camera.
Quietly load the digital camera into the Case, taking care that the projecting part of the zoom lever of the digital camera properly fits into the recessed part of the zoom lever of the Case.
CAUTION : • Confirm that the projecting part of the zoom lever of the digital camera is set securely to the zoom lever notch on the inside of the Case. When the setting is not secure, the loading of the digital camera is not complete and closing of the rear lid of the Case may not be possible or zoom may not function even when the zoom lever is operated.
•Insufficient sealing will cause water leakage.