Correct, Make sure the film is lying flat | Olympus RC-200 instruction

A. Correct

Make sure the film is lying flat.

B. Incorrect

Push the film cartridge gently to

position the film correctly. Then press the left side of the back cover and close it securely. If the

film is not lying flat, the film may

not advance to the first frame.

Caution: Do not touch the plastic

parts near the take-up spool.

16

Image 16

Olympus RC-200 manual Correct, Make sure the film is lying flat, Incorrect, Push the film cartridge gently to

Contents

Read this manual carefully before using your camera InstructionsPage Page Taking panorama pictures Using the RC-200 remote control Shooting mode button Selftimer/remote control button Names of Parts Do not soil as this can cause blurred pictures. Wipe clean Viewfinder Display LCD Panel Viewfinder Display LCD Panel Optionally available Simultaneously as shown Attach the strap as shown Loading the Battery IMMEDIATELY.11 Cold area Checking the Battery Open the lens barrier until you feel a click Proper Shutter Release Practice before loading the film Loading the Film Recommended Correct Make sure the film is lying flatIncorrect Push the film cartridge gently to Align the film leader with Mark , and close the back cover Taking Pictures Page How to Use the Zoom Lever Position the autofocus mark on your subject Focus has been correctly Depress the shutter Picture Close-up Correction Lens retraction After ShootingClosed Unloadingthefilm Rewinding the film before the end of the roll Open in the Panorama mode Switch to either end, notSwitch only Do not touch the slidingPage Close-up Correction Panorama Mode At about 0.6 m 2 ft Using the Shooting Modes Setting the Modes Subjects are close 38 mm 80 mm Auto FlashFlash Working Range with Color negative film RED-EYE Reducing Flash Page OFF Flash Override Flash modeTwilight or night scenes Down to 2 seconds is Forced Activation FILL-IN Flash OFF flash override InfinitySince the autofocus system is Night Scene Flash RED-EYE Reducing Night Scene Flash Mode Backlight Control Backlit Difficult-to-Autofocus Subjects Page Selftimer Sec Selftimer indicator lights Sec BlinksPress the button to display Fix the camera on a tripod or other supportPage Using the RC-200 Remote Control optional Remote control may not work Light near the camera Open the buckle ~ , insert the strap , and close the buckle Remote control can beAttaching to the Strap Replacing the Battery Handling Cautions Press the Mode button for two seconds or longer Press the SET button to Correct the yearYear indication will start blinking If you press the button once Number on the display will Repeat steps 2 and 3 to set the day, hour and minutes Press the Mode button againMonth indication will start blinking Make sure to correct the data Page Care and Storage Do not leave the camera in any Place exposed to excessiveCar or on the beach Magnetic field Or to extreme cold below Do not expose the camera toVentilated place Put the camera into a plastic Page Caring for Your Weatherproof Camera Camera can withstand splashingPage Page Specifications Image zoom viewfinder Backlight control +1.5 EV Setting with DX-coded film 800, 1600 and 3200. Film Film advance Automatic film winding Off, Fill-in Flash Night Eye Reducing Night Scene Flash 185g6.5oz Film speed setting Automatic calendar system Up To year Specifications Fordate UnitLens side Battery One CR1220 Replaceable service lifeWeight 11 g 0.4 oz without Battery 1199.50MH