Do not touch the sliding, Panorama borders inside | Olympus RC-200

	TAKING PANORAMA PICTURES
	Set the switch to PANORAMA.
	Caution: To avoid malfunction,
	do not touch the sliding
	panorama borders inside the
	camera when the back cover is
	open in the Panorama mode.
	Notes:
	Always set the panorama
	switch to either end, not
	midway between the two ends.
	The panorama frame in the
	viewfinder will disappear after a
	certain amount of time. To
	display it again, close and
	open the lens barrier.
	* Models with the panorama
26	switch only.
26

Image 26

Olympus RC-200 manual Do not touch the sliding, Panorama borders inside, Open in the Panorama mode, Always set the panorama

Contents

Read this manual carefully before using your camera InstructionsPage Page Taking panorama pictures Using the RC-200 remote control Shooting mode button Selftimer/remote control button Names of Parts Do not soil as this can cause blurred pictures. Wipe clean Viewfinder Display LCD Panel Viewfinder Display LCD Panel Optionally available Simultaneously as shown Attach the strap as shown Loading the Battery IMMEDIATELY.11 Cold area Checking the Battery Open the lens barrier until you feel a click Proper Shutter Release Practice before loading the film Loading the Film Recommended Incorrect CorrectMake sure the film is lying flat Push the film cartridge gently to Align the film leader with Mark , and close the back cover Taking Pictures Page How to Use the Zoom Lever Position the autofocus mark on your subject Focus has been correctly Depress the shutter Picture Close-up Correction Closed After ShootingLens retraction Unloadingthefilm Rewinding the film before the end of the roll Switch only Open in the Panorama modeSwitch to either end, not Do not touch the slidingPage Close-up Correction Panorama Mode At about 0.6 m 2 ft Using the Shooting Modes Setting the Modes Subjects are close Flash Working Range with Color negative film Auto Flash38 mm 80 mm RED-EYE Reducing Flash Page Twilight or night scenes Down to 2 seconds is Flash modeOFF Flash Override Forced Activation FILL-IN Flash Since the autofocus system is InfinityOFF flash override Night Scene Flash RED-EYE Reducing Night Scene Flash Mode Backlight Control Backlit Difficult-to-Autofocus Subjects Page Press the button to display SelftimerSec Selftimer indicator lights Sec Blinks Fix the camera on a tripod or other supportPage Using the RC-200 Remote Control optional Remote control may not work Light near the camera Attaching to the Strap Remote control can beOpen the buckle ~ , insert the strap , and close the buckle Replacing the Battery Handling Cautions Year indication will start blinking Press the Mode button for two seconds or longerPress the SET button to Correct the year If you press the button once Number on the display will Month indication will start blinking Press the Mode button againRepeat steps 2 and 3 to set the day, hour and minutes Make sure to correct the data Page Car or on the beach Care and StorageDo not leave the camera in any Place exposed to excessive Magnetic field Ventilated place Do not expose the camera toOr to extreme cold below Put the camera into a plastic Page Caring for Your Weatherproof Camera Camera can withstand splashingPage Page Specifications Image zoom viewfinder Backlight control +1.5 EV Setting with DX-coded film 800, 1600 and 3200. Film Film advance Automatic film winding Off, Fill-in Flash Night Eye Reducing Night Scene Flash 185g6.5oz Lens side Specifications Fordate UnitFilm speed setting Automatic calendar system Up To year Weight 11 g 0.4 oz without Battery One CR1220Replaceable service life Battery 1199.50MH