hPause

While the recorder is during recording mode, press the

REC (s) button.

• The recorder will time out after 60 minutes when left in “Rec Pause”.

Resume Recording:Press the REC (s) button again.

• Recording will resume at the point of interruption.

hTo quickly check on the recorded contents

While the recorder is during recording mode, press the

`OK/MENU button.

• Stop recording and the file that was just recorded will be played back.

hMicrophone sensitivity

Microphone sensitivity is adjustable to meet recording needs.

Select [Mic Sense] from the menu on the [Rec Menu]. (please see “Menu setting” ☞ P.9, “Mic Sense” ☞ P.11)

hRecording from external microphone or other devices

The external microphone and other devices can be connected and the sound can be recorded. Connect as follows by the device to be used.

•Do not plug and unplug devices into the recorder’s jack while it is recording.

To MIC jack

Recording with external microphone:Connect an external microphone to the MIC jack of the recorder.

Notes:

• The built-in microphone will become inoperable when an external microphone is plugged into the recorder’s MIC jack.

• Microphones supported by plug-in power can also be used.

• When the external stereo microphone is used while [Rec Mode] is set to a monaural recording mode, audio will be recorded to the L channel only*.

•When an external monaural microphone is used while [Rec Mode] is set to a stereo recording mode, it enables recording only with the L channel microphone*.

*For VN-8100PC only.

Notes:

•To ensure recording from the beginning, start recording after you see the display and the recording indicator lights on.

•When remaining recording time is less than 60 seconds, the recording indicator light starts flashing. When the recording time is decreasing to 30 or 10 seconds, the light flashes faster.

•[Folder Full] will appear when the recording cannot be made any further. Select on other folder or delete any unnecessary files before recording.

•[Memory Full] will appear when the memory is full. Delete any unnecessary files before recording any further.

•When external devices are connected, perform a test recording and then adjust the output level for the external devices.

•When you adjust the various sound quality settings related to playback on the recorder, the audio output signal sent out from the EAR jack will change as well.

- 5 -