About playback

hPlayback

1Press the FOLDER/INDEX/

SCENE button to select the desired folder.

aFolder indicator

2Press the 9 or 0 button to select the file to playback.3Press the `OK/MENU button to start playback.

bElapsed playback time/ cFile length

a

b

c

4Press the + or − button to adjust to a comfortable listening volume.

• The volume can be adjusted within a range from [00] to [30].

5Press the STOP (4) button at any point you want to stop the playback.

• This will stop the file being played back midway. When the resume function is activated the stopped location will be registered, even if the power is turned off. The next time the power is turned on, playback may be resumed from the registered stopped location.

hForwarding and Rewinding

While the recorder is during stop mode, press and hold the 9or 0button.

• If you release the button, it will stop. Press the `OK/MENU button to start playback from where it was stopped.

While the recorder is during playback mode, press and hold the 9or 0button.

• When you release the button the recorder will resume normal playback.

•If there is an index mark or temp mark in the middle of the file, the recorder will stop at that location.

•9: The recorder stops when it reaches the end of the file. Continue pressing the 9button to proceed with the cue from the beginning of the next file.

0: The recorder stops when it reaches the beginning of the file. Continue pressing the 0button

to proceed with the review from the end of the previous file.

hLocating the beginning of the file

While the recorder is during stop mode or playback mode, press the 9button.

• The recorder skips to the beginning of the next file.

While the recorder is during playback mode, press the

0button.

• The recorder skips to the beginning of the current file.

While the recorder is during stop mode, press the 0 button.

•The recorder skips to the beginning of the previous file. If the recorder stop the midway of the file, return to the beginning of the file.

While the recorder is during playback mode, press the 0button twice.

• The recorder skips to the beginning of the previous file.

Notes:

•When you skip to the beginning of the file during playback, the recorder will start playback at the position of an index mark or temp mark. The index mark and temp mark will be skipped when you perform the operation in stop mode.

•When [Skip Space] set to other than [File Skip], the recorder will skip forward/reverse the specified time, then will start playback.

- 6 -