EN
12
supply Power

Power supply

Charging by connecting to a computer via USB

"For WS-520M/WS-510M/ WS-500M:

You can charge the batteries by connecting

1 to a PC's USB port. When charging, be sure to correctly place the rechargeable batteries (supplied) into the recorder (☞ P.10).

Do not charge the primary batteries such as alkaline or lithium batteries. It may cause battery leakage heating and recorder malfunction.

1Boot the PC.

2Slide the USB connector slide lever in the direction indicated by the arrow to eject the USB connector out of the recorder.

3While pressing the STOP (4) button, connect to the PC’s USB port.

•When charging the battery, press and hold the STOP (4) button until [Please Wait] is displayed.

4Charging is completed when battery indication becomes to [<].

Charging time: approximately 3 hours * * It shows the approximate time when charging the rechargeable battery fully from no remaining power at the

room temperature. The charging time will be changed depending on the remaining amount and the state of batteries.

Notes

•The recorder cannot be charged when the PC is not turned on. Also, it may not be charged when the PC is in standby mode, stop mode and sleep mode.