Olympus WS-510M, WS-520M, WS400S HOLD, Power supply HOLD, Slide the HOLD switch in the opposite direction that indicated by the arrow

Power supply HOLD

Turning on the power

Slide the HOLD switch in the opposite direction that indicated by the arrow.

1

supply/HOLD Power	The display will turn on, and the power will
•
	be turned on.
•	The resume function will bring the
	recorder back to the stop position in
	memory before power was turned off.
	Turning off the power

While the recorder is during stop mode, slide the HOLD switch in the direction indicated by the arrow.

•The display shuts off, and the power will be turned off.

•The resume function remembers the stop position before the power is turned off.

Power save mode

If the recorder is stopped/not used for over 5 minutes after it is turned on, it goes into standby (power-save) mode, and the display shuts off.

•To exit standby mode and turn on the display, press any button.

EN

14

If you bring the recorder is set to HOLD mode, the running conditions will be preserved, and all buttons will be disabled. This feature is useful when the recorder has to be carried in a bag or pocket.

Set the recorder to HOLD mode

While the recorder is during stop mode, slide the HOLD switch in the direction indicated by the arrow.

•After [Hold] appears on the display, the recorder is set to HOLD mode.

Exit HOLD mode

Slide the HOLD switch in the opposite direction that indicated by the arrow.

Notes

•If you press any button in HOLD mode, the clock display flashes for 2 seconds, but it will not operate the recorder.