Setting time and date [Time & Date]

•The clock will start from the set date and time. Press the OK `button according to the time signal.

2Press the + or − button to select [Device Menu] tab.

•You can change the menu display by moving the settings tab cursor.

1

Setting

Note

 

time

• If you press the OK `button during the

setup operation, the recorder will save the

and

items that were set to that point.

Changing the time and date

date

While the recorder is during stop mode,

 

 

press and hold the STOP (4) button to

 

display the [Time & Date], and [Remain]. If

 

the current time and date is not correct, set

 

it using the procedure below.

 

+− button

 

9button

 

OK `button

 

MENU button

1While the recorder is during stop mode, press the MENU button.

•The menu will appear on the display (☞ P.36).

EN

3Press the OK `or 9button to move the cursor to the item to set.

•[Device Menu] will appear on the display.

4Press the OK `or 9button.

•[Time & Date] will appear on the display.

•The “hour” will flash on the display, indicating the start of the Time and Date setup process.

The following steps are the same as Step 1 through Step 3 of “Setting time and date [Time & Date]” (☞ P.15).

5Press the MENU button to close the menu screen.

16