Omage IPRD8 owner manual IPRD6.5 6.5” In-ceilingSpeaker, IPRD6.5ST 6.5” In-ceilingStereo Speaker

IPRD SERIES OWNER’S MANUAL

IP Series In-Ceiling Speaker Specifications

IPRD6.5 6.5” In-ceiling Speaker

Woofer: 6.5” Woven Kevlar cone, rubber surround, 18oz Magnet, 1” voice coil, Bumped back plate, vented pole piece

Tweeter: 1” Titanium Dome tweeter, Ferro-fl uid cooled, Neodymium magnet, Swivel 30 degrees

Crossover: Phonalic PCB board, 18dB woofer section, 18dB tweeter section, polymide auto protective reset switch for tweeter Attenuation switches: ± 3dB on woofer and tweeter

Frequency response: 48Hz~22kHz

Sensitivity: 88dB

Recommended amplifier power: 10~125W

Impedance: 4ohm / 8ohm switch-able on PCB

Cut out size: 7.95”

Weight (pair pack): 11 lbs

Dimensions (pair pack): 15.5”(H) X 11.5”(W) X 11”(L)

Paint mask and cut out template included

IPRD6.5ST 6.5” In-ceiling Stereo Speaker

Woofer: Dual 1” voice coil, 6.5” Woven Kevlar cone, rubber surround, 18oz Magnet, Bumped back plate, vented pole piece

Tweeter:2x1”TitaniumDometweeter,Ferro-fl uidcooled,Neodymium magnet, Swivel 30 degrees

Crossover: Phonalic PCB board, 12dB woofer section, 12dB tweeter section, polymide auto protective reset switch for tweeter Frequency response: 48Hz~22kHz

Sensitivity: 88dB

Recommended amplifier power: 10~125W per channel

Impedance: 8 ohm

Cut out size: 7.95”

Weight (pair pack): 6 lbs

Dimensions (pair pack): 8”(H) X 11”(W) X 11”(L)

Paint mask and cut out template included

8