Omega Engineering PSW2000 Dialog item Value Description, Only models with 2nd switching contact

PSW2000.qxp 6/12/2008 10:38 AM Page cov-6

List of functions:

Dialog item	Value	Description
	0 ... 400	Display of the actually measured value
	....	Select the display unit
		= mbar	= psi x 10	= hPa
		= bar	= psi	= mPa
		Activation of the unit display
		= unit display on (every 30 sec)
		= no unit display
	....	= Window technology		= error output
		= standard evaluation
	0 ... xxx	Switch-on point for SP1; if the ON value is smaller than the OFF value the
		switching point evaluation is falling
	0 ... xxx	Switch-off point for SP1

0.0s ... 9.9 s Switch-on delay for SP1 in seconds

0.0s ... 9.9 s Switch-off delay for SP1 in seconds

....	Inversion of switching output SP1
	= high-level-fail-save (normally open function)
	= low-level-fail-save (normally closed function)

Only models with 2nd switching contact:

	= Window technology	= error output
	= standard evaluation
0 ... xxx	Switch-on point for SP2; if the ON value is smaller than the OFF value the
	switching point evaluation is falling
0 ... xxx	Switch-off point for SP2

0.0s ... 9.9 s Switch-on delay for SP2 in seconds

0.0s ... 9.9 s Switch-off delay for SP2 in seconds

....	Inversion of switching output SP2
	= high-level-fail-save (normally open function)
	= low-level-fail-save (normally closed function)

4