6.2 MERCURY WETTED (/M) VERSIONS
POWER CONSUMPTION |
|
510 mA + (22 mA per activated relay max) |
GENERAL SPECIFICATIONS |
|
Number | 8 / 16 |
Contact arrangement | Form A (SPST) |
Contact rating | 50 Watts @ 1Amp or |
| 500VDC resistive |
Contact type | Mercury wetted |
Contact resistance | 50 milliohms max. |
Operate time | 2 milliseconds |
Release time | 2 milliseconds max. |
Dielectric isolation | 500V (1 minute) |
Life Expectancy | 107 Operations (Full Load) |
ENVIRONMENTAL |
|
Operating temperature | 0 to 70 °C |
Storage temperature | |
Humidity | 0 to 90% |
Weight | 8 oz. |
2 QUICK START
The installation and operation of all four
The
We recommend you perform the software installation described in the following sections prior to installing the board in your com- puter. The InstaCalTM operations below will show you how to prop- erly set the switches and jumpers on the board prior to physically installing the board in your computer.
2.1 Install the InstaCalTM software
Windows 95, 98 and NT users install InstaCAL by running the SETUP.EXE program included on your InstaCAL floppies or CD.
Windows 3.x and DOS users install the program by running the INSTALL.EXE pro- gram supplied on your InstaCAL disk.
These installation routines will create all required folders/directories and unpack the various pieces of compressed software. Simply run install and follow the
13 | 2 |