Omega Vehicle Security LDN-PS manual PSIM-AC PSIM-DC PSIM-5V

6.0: Specification (continued)
			PSIM-AC	PSIM-DC	PSIM-5V
PSIM-5V
Line Voltage	see note 1	5.1 Vdc Nominal as supplied by user
		5.25 Vdc MAX
Input Current		1.8 A MAX
Connection	see note 3	5m flying lead (Red = positive, White = negative)
Isolation		None
Protection	see note 2	Current limiting resettable fuse
		Over voltage 112% to 132% of nominal
		Reverse connection
		Transient

Note 1: No isolation or regulation is provided by the PSIM-5V. The voltage required should be set as required to ensure correct operating voltage for each PIE that follows the PSIM-5V. See application notes for further information.

Note 2: If there is a fault condition caused, for example, by a short circuit or transient, the protection circuits will operate. The power must be removed and the fault corrected before the power is reinstated. Under a fault condition, Orbit modules will not function correctly and a power on reset is required. See application notes for further information.

Note 3: Supplied with 5m input cable as standard. This may be cut to length as required.

LDN-PS	15
		M-3340/1206