Omega Vehicle Security OMG-COMM232-PCI manual Installation, Windows, Other Operating Systems

Installation

Installation

Operating System Installation

Windows 95/98/NT

Run Setup on Disk 2 of the Serial Utilities Software.

Windows 3.1x

Refer to the Win3x.hlp file in the \Win31 directory on Disk 1 of the Serial Utilities Software.

DOS

Refer to the Readme.txt file found in the \DOS directory on Disk 1 of the Serial Utilities Software.

Other Operating Systems

Refer to the appropriate directory on Disk 1 of the Serial Utilities Software.

Hardware Installation

The OMG-COMM+232.PCIcan be installed in any of the PCI expansion slots and contains several jumper straps for each port that must be set for proper operation.

1.Turn off PC power. Disconnect the power cord.

2.Remove the PC case cover.

3.Locate an available PCI slot and remove the blank metal slot cover.

4.Gently insert the OMG-COMM+232.PCIinto the slot. Make sure that the adapter is seated properly.

5.Replace the screw.

6.Replace the cover.

7.Connect the power cord.

Installation is complete.

Omega Engineering COMM+232.PCI Page 7