Step 7
Rock table to check that it is level and stable. For unstable condition, unscrew shortest Leveling Foot until table sits level.
Peel Self Adhesive Pads (L) from backing paper, and apply to table assembly as indicated by the black dots, as shown in Fig. 7.
Note: There should be 5 Adhesive pads applied to each shelf.
Fig. 7
Fig. 8
Step 8
Identify Glass Shelves by shape, as shown in Fig. 8.
Step 1
Refer to Fig. 1.
Install End Caps (M) into bottom of Main Frame (C) using rubber mallet.
Determine desired location of middle shelf; high or low. Install Center Support Brackets (K) to desired
shelf location with Hex Screws (I), and Small Hex Wrench (P).
Step 2
Insert open end of Main Support Legs (E) and Center Support Legs (F) over brack- ets on Main Frame, as shown in Fig. 2.
Note: The curve on the Support Legs should face inwards, and the mounting holes should face towards the bottom of the Main Frame.
Fig. 2 | Loosely secure Support |
| Legs to Main Frame with |
| Hex Screws. |
6 | 3 |
