Compaq AP500 manual CD-ROM Drive IDE Test Error Codes, Tape Drive Test Error Codes

4-30Diagnostic Tools

CD-ROM Drive (IDE)

Table 4-21

CD-ROM Drive (IDE) Test Error Codes

Error Code	Description	Recommended Action
3301-xx	CD-ROM drive read test failed.	The following steps apply to error codes 3301-xx
		through 3305-xx and 6600-xx through 6623-xx:
3305-xx	CD-ROM drive seek test failed.	1.	Replace the CD and retest.
6600-xx	ID test failed.	2.	Check the jumper settings on the CD-ROM drive.
6605-xx	Read test failed.	3.	Verify that the speaker is connected.
6608-xx	Controller test failed.	4.	Check and/or replace the power and signal cables
			and retest.
6623-xx	Random read test failed.	5.	Replace the CD-ROM drive and retest.
		6.	Replace the system board and retest.

Tape Drive

Error Code

Table 4-22

Tape Drive Test Error Codes

Description Recommended Action

1900-xx

1901-xx

1902-xx

1903-xx

1904-xx

1905-xx

1906-xx

Tape drive ID test failed.

Tape drive servo test failed.

Tape drive format or format verification test failed.

Tape drive sensor test failed.

Tape drive BOT/EOT test failed.

Tape drive read test failed.

Tape drive write/read/compare test failed.

The following steps apply to error codes 1900-xx through 1906-xx:

1.Replace the tape cartridge and retest.

2.Check the switch settings and terminations on the tape drive.

3.Check and/or replace the signal cable and retest.

4.Replace the tape drive and retest.

5.Replace the system board and retest.