Compaq AP500 manual Removing a 10,000-rpm Hard Drive from Bays 5 or

3-31

Removing a 10,000-rpm Hard Drive from Bays 5 or 6

Drive bays 5 and 6 can be configured with a 10,000 rpm hard drive. The removal of the drive is basically the same as removing a 7200 rpm hard drive except you will be also be removing a cooling fan. :

To remove a 10,000-rpm hard drive:

1.Perform the service preparations shown on page 3-2.

2.Remove the following components:

❏Side access panel

❏Front bezel

3.Disconnect the signal and power cables.

Figure 3-27. Disconnecting the cables from the hard drive

Compaq Professional Workstation AP500 Maintenance and Service Guide