Compaq AP500 manual Expansion Boards, Identifying the PCI and ISA Expansion Slots

3-12Removal and Replacement Procedures

Expansion Boards

This section discusses removal and replacement procedures for PCI or ISA expansion boards and the Accelerated Graphics Port (AGP) graphics controller.

NOTE: The following instructions also apply to installing and removing graphics controllers. For information about the installed graphics controller, refer to the appropriate guide on the SmartStart for Workstations CD under X:/DOCS/GRAPHICS, where X is the CD-ROM or DVD-ROM drive on your machine.

Identifying the PCI and ISA Expansion Slots

The Compaq Professional Workstation AP500 contains five expansion slots on the I/O bracket assembly: three PCI expansion slots, one shared PCI/ISA expansion slot, and one ISA expansion slot. The following illustration identifies the physical locations. See the corresponding table for component names.

1

2

3

4

5

Figure 3-10. Identifying the expansion slots