
4-8 Diagnostic Tools
Power Problems
This section identifies some quick checks for
Table
Solutions for Power Problems
Problem
Computer will not turn on.
System will not boot.
Possible Solution
Be sure the workstation is connected to a working grounded AC outlet.
Be sure the processor(s) and terminator board are properly seated.
Check to see if cables to the external power source are unplugged. Be sure cables connecting the workstation and the external source are plugged in properly. Be sure cables from the workstation’s power supply are properly plugged in to the system board.
A PCI or ISA card that has been installed is not seated properly or is defective. Be sure that the card is fully inserted, or remove the PCI or ISA card that was just installed.
If the LED is a steady amber color, reseat the I/O bracket assembly (expansion board assembly).
Computer does not automatically The
Computer powered off | The maximum safe unit temperature may have been exceeded. Turn off the unit and allow | |
automatically. | it to cool. | |
|
|
|
| ACPI may be the cause. Unplug the unit from AC power and wait 10 seconds. Plug unit | |
| back in and restore power. | |
|
|
|