Problem Possible Cause Solution
Not Drying Lint screen is clogged with lint. CIean Iint screen,
Satisfactorily Restricted air movement, Rundryer for 5-10 minutes. Hold
Exhaust vent or outside exhaust hand under outside exhaust hood to
hoodis cloggedwith Iint. check air movement. Ifyou donot feel
air moving, clean exhaust system of
lint orreplace exhaust ventwith rigid or
flexible heavy metal vent
(see "INSTALLATION','Section K).
Exhaust vent is crushed Replace with rigid or flexible
or kinked, heavy metal vent
(see "INSTALLATION','Section K).
Gasvalve on supply Iine Open allvatves.
is closed.
Timer or the temperature Select the right cycle for the types
controI is set on AiR DRY. ofgarments being dried
(see "OPERATION").
Fabric softener sheets Use only one softener sheet per Ioad
blocking outlet grill, and only use it once.
Dryer located in room with Move laundry center where it can
temperature beIow 45°E operate in ambient air temperatures
above 45°E
Large amount of moisture Expect longer dry times with items
in the load. that hold more moisture (cottons),
Cold rinse water used. Expectlonger drytimes, butyou are
saving energy and reducing wrinkles.
Load too large and bulky Separate load to tumble freely.
todry quickly.
Dryer Will Power cord not firmly plugged Plugpower cord into a Iive circuit.
Not Run into alive circuitwith proper
voltage.
Fuses blown or circuit Replace fuses or reset breakers.
breakers tripped.
Using a regular fuse. Replace with atime-delay fuse.
Dryer door notfirmly closed. CIose dryer doortightly.
PUSH TO START DRYER Press PUSHTO START DRYER
Button not firmly pressed. Button again.
Controls not setin an Reset controls in an ON position.
ON position.
58