LOADING TIPS - DRYER
• Mix large items with small items.
Load the dryer by the amount of space
items take up, not by theirweight. Do
not overload the dryer. Overcrowding
causes uneven drying and wrinkling,
and can cause items to wear out faster
(because of pilling).
• You may need to rearrange large items
(sheets, blankets, tablecloths) during
a cycle to reduce bailing or rolling up.
• For better tumbling action, when drying
only a few small items, addone or two
lint-free towels. This also prevents small
lightweight items from blocking airflow.
USING DRYERFABRIC SOFTENERS
Dryer fabric softeners are recommended
for reducing static cling. Always follow
package instructions carefully.
• Put one fabric softener sheet on top
of the loadbefore starting the dryer.
Do not adda fabric softener sheet after
the drying cycle has started. Instant
heat can cause the fabric softener to
spot fabrics.
• Remove fabric softener stains by wetting
the stains and rubbing them with liquid
detergent or bar soap and rewash.
• Some fabric softeners can clog the lint
screen and slow drying. Usefabric
softeners labeled as dryer safe.
SAVING ENERGY
• Use the automatic drying cycles to
dry most loads.
• Dry full loads only. Do not overdry.
• Avoid overloading dryer, adding wet
items to a partly dried load, or opening
the door unnecessarily.
• Shorten drying times by exhausting
laundry center properly and cleaning
exhaust vent and outside exhaust
hood as needed.
• Keep the lint screen clean.
• Usedryer where room air temperature
is above 45°F.
•Sort loads by fabric weight and type.
46