Image Scanner User's Manual
¡ System error
Scanner | Document feeder | ||
Green | Amber | Green | Amber |
Blinking | Blinking | Blinking | Blinking |
|
|
|
|
Corrective action
Initialize the scanner by switching the scanner off and on again or press the reset switch. If the error is not solved, please contact your service representative.
¡ Others
If a problem occurs that is not indicated by the indicators, follow the directions below.
Problem | Cause | Corrective action | Refer |
|
|
|
|
Power does not | Power cord is not plugged in. | Plug the power cord in. | P.7 |
|
|
|
|
go on. | Power switch is not turned on. | Turn on the power. | P.8 |
| I/F cable is not connected securely. | Connect it securely. | P.6 |
Does not run af- | Host computer malfunction. | Reset the computer. | - |
|
|
|
|
ter power is on. | SCSI ID is not correct. | Correct the SCSI ID. | P.7 |
|
|
|
|
| DIP switches setting is not cor- | Correct the DIP switches | P.8 |
| rect. | setting. |
|
Originals are not | The roller is not clean. | Clean the roller. | P.15 |
|
|
|
|
fed normally. | Specifications of originals do not | Place originals which | P.12 |
| match with the document condi- | match the document con- |
|
| tions. | ditions. |
|
Scanned image | The contact glass is not clean. | Clean the contact glass. | P.14 |
|
|
|
|
is abnormal. | The roller is not clean. | Clean the roller. | P.15 |
|
|
|
|
- 20 -
Page 20 | 97.5.8, 5:36 PM | PageMaker 5.0J |
