Compaq AP500 manual Removing a Hard Drive from the Removable Hard Drive Cage

3-37

Removing a Hard Drive from the Removable Hard Drive

Cage

The removable hard drive cage supports up to three 1.0-inch hard drives or two 1.6-inch hard drives. Other than using different screw holes, the removal and replacement for both drives is basically the same.

To remove a hard drive in the removable hard drive cage:

1.Perform the service preparations shown on page 3-2, then lay the workstation on its side.

2.Remove the following components:

❏Workstation feet

❏Side access panel

3.Disconnect the cables from the back of the hard drive(s).

Figure 3-35. Disconnecting the cables from the back of a hard drive

Compaq Professional Workstation AP500 Maintenance and Service Guide