
Electrostatic Discharge Information
A discharge of static electricity can damage
■Transport products in
■Keep
■Cover workstations with approved
■Keep work area free of
■Be sure you are always properly grounded when touching a
■Avoid touching pins, leads, or circuitry.
■Always place drives PCB
■Use conductive field service tools.
Equipment Symbols
The following symbols are located on applicable components of the workstation and should be observed when servicing the workstation to avoid personal injury or damage to the components:
WARNING: Any surface or area of the equipment marked with these symbols indicates the presence of a hot surface or hot component. If this surface is contacted, the potential for injury exists. To reduce risk of injury from a hot component, allow the surface to cool before touching.
WARNING: Any surface or area of the equipment marked with these symbols indicates the presence of electrical shock hazards. Enclosed area contains no operator serviceable parts. To reduce risk of injury from electrical shock hazards, do not open this enclosure.
WARNING: Any
Compaq Professional Workstation AP500 Maintenance and Service Guide