
Removing the Card Guide
To remove the card guide:
1.Perform the service preparations shown on page
2.Remove the following components:
❏Workstation feet
❏Side access panel
❏I/O bracket assembly
❏
3.Using a blunt tool, press inward on the two center tabs on the card guide.
4.Gently pull the card guide out.
Figure 3-13. Removing the card guide
To replace the card guide, reverse the above procedure.
IMPORTANT: Before replacing the I/O bracket assembly, read “Important Guidelines for I/O Bracket Assembly Replacement” earlier in this chapter.
Compaq Professional Workstation AP500 Maintenance and Service Guide