Compaq AP500 manual 34Removal and Replacement Procedures

3-34Removal and Replacement Procedures

8. Remove the retaining screws and lift the hard drive from the bracket.

Figure 3-32. Removing a hard drive from the hard drive bracket

To reinstall a hard drive in Bays 5 or 6, reverse the above procedure.

CAUTION: Use only 3/16-inch or 5 mm long screws. Using longer screws can damage the internal components of the drive.

CAUTION: When servicing the workstation, be sure cables are placed in their proper locations during the reassembly process. Improper cable placement can damage the computer.