Compaq AP500 manual Cable Lock

3-3

Cable Lock

The workstation comes standard with a cable lock provision for attaching a padlock and/or cable lock. If installed, the locks must be removed before accessing internal components.

To remove the lock:

1.Unlock and remove the cable lock and/or the padlock B.

2.	Remove the security bracket (plate) seated over the cable lock bracket .
3.	Unfasten the retaining screw to release the cable lock bracket .

	1
	3
	2
Figure 3-2.	Removing the padlock

NOTE: In some of the removal procedures in this chapter, you will be asked to remove the workstation feet and lay the workstation on its side when servicing some of the internal components.

NOTE: For more information on preparing the workstation for service, see Chapter 2.

Compaq Professional Workstation AP500 Maintenance and Service Guide