| Revision A |
3.1.2.3 Clearing the Service-call Error
3.1.4 Troubleshooting
Troubleshooting for the engine related problems are described in the following sections.
3.1.3 Adding on RAM
The
1)Make the resolution 300 dpi.
2)Set the receive buffer size on minimum.
3)Fix the interface.
To avoid any shortage of memory, memory must be increased. (Limited to SDRAM DIMMs for PCs that are available on the marked:
3.1.4.1 The Printer will not Start
Table 3-4. Troubleshooting - The Printer will not Start.
Symptom | Analysis | Finding | Action | |
|
|
|
| |
| Plug in another electrical | No | Faulty power outlet. | |
| appliance and see if it is |
|
| |
| Yes | To next step. | ||
| started. | |||
|
|
|
| |
| Check the power cord for | No | Defective power cord. | |
The printer |
|
| ||
continuity. | Yes | To next step. | ||
won’t start. |
| |||
|
|
| ||
|
| No | Defective low voltage | |
| Listen for the fan starting | power supply unit. | ||
|
| |||
|
|
| ||
| whirling. |
|
| |
| Yes | Defective or loose control | ||
|
| |||
|
| panel. | ||
|
|
| ||
|
|
|
|
Troubleshooting | Overview | 85 |