Epson N2700 manual Disassembly/Assembly 117

EPSON EPL-N2700 Rev. A

13.Remove one pressure spring on the front, E-ring (9107), and remove the yellow Pressure Lever Assembly.

Figure 4-44. Front Pressure Lever Removal

14. Remove the Upper Fusing Roller and the bearings.

Figure 4-45. Upper Fusing Roller Removal

15.Remove two C-rings attached to the front and rear ends of the Lower Fusing Roller.

16. Remove the Lower Fusing Roller by pulling it out from the gear side.

Figure 4-46. Lower Fusing Roller Removal

17.Remove one screw (1309) securing the Fusing Roller Thermistor to the Fuser Unit Frame Assembly and remove the Fusing Roller Thermistor.

Figure 4-47. Fusing Roller Thermistor Removal

Chapter 4 Disassembly/Assembly 117