Epson N2700 manual Setting Item Description, MP Tray Size, MP Type

EPL-N2700 Revision A

1.4.2.2User Setting Items which are not include in the Setting Menu

The items shown below are not included in the setting menu but can be set by users. The values set by the users are not cleared by the initialization through the control panel.

Setting Item	Setting value	Default Value	Setting method
PrinterName	32-byte character	EPL-N2700	EJL, Printer Name
	string		Command
Device ID MFG	32-byte character	(Undefined)	EJL
	string
Device ID MDL	32-byte character	(Undefined)	EJL
	string
Device ID DES	32-byte character	(Undefined)	EJL
	string
Device ID CID	32-byte character	(Undefined)	EJL
	string
Mail Bin 1 - 10 NAME	24-byte data	(Undefined)	EJL
MP Tray	-0.4 mm to 4.00 mm	0.0 mm	EJL
compensation	(in 0.5 mm steps)
LC1 - LC3	-0.4 mm to 4.00 mm	0.0 mm	EJL
compensation	(in 0.5 mm steps)
Duplex compensation	-0.4 mm to 4.00 mm	0.0 mm	EJL
	(in 0.5 mm steps)

1.4.2.3 Setting Item Description

This section provides the information on the product-specific setting item.

MP Tray Size

“Auto” is added and the North American version automatically detects LT, HLT, LGL, EXE, GLG, GLT, and B paper sizes, while the versions for areas other than North America detect the A3, A4, A5, IB5, LTR, LGL, and F4 paper sizes. When “Auto” is selected, the following conditions should be considered:

If the edge guide is set to any position other than automatic

￿selectable paper sizes, the paper size loaded is detected A3.

The automatically selected paper size is shown in Status Sheet and EJL status.

MP Type

Selects the paper type for the MP Tray.

If “Paper Source” is set to “Auto”, the printer automatically selects the paper source that matches the selected paper type from the paper sources that currently store the selected paper size.

The MP Type selected during paper source selection is only specified with the EJL command.

In printer modes that have no specification command, operations are the same as when “Plain” is set for “MP Type”.

The EPL-N2700 has the setting item “Paper Type”, if the “Paper Type” is set to “Normal” and “MP Tray” is set to “Transprnc” or Letterhead”, the MP Type is also set to the engine side.

Product Description Panel Operation 38