EPSON EPL-N2700

Rev. A

4.2.4.5 Timing Roller Removal

1.Remove the Transfer Unit. (See Section 4.2.4.2.)

2.Put up the transfer front guide plate. (See Section 4.2.4.1.)

3.Remove the Timing Clutch. (See Section 4.2.4.4.)

4.Release the hook securing the Guide Bar to the Holder Assembly and remove the paper dust remove filter from the Holder Assembly.

5.Remove two tension springs securing the bushing for the Timing Driven Roller to the Holder Assembly.

6.Remove two E-rings (9140) from the right and left ends of the Timing Sub Roller. Then remove one gear (13T), two busings, and the Timing Driven Roller.

7.Remove E-rings (9140) from the right and left ends of the Timing Drive Roller. Then remove one gear (18T), two bushings, and the Timing Drive Roller.

Figure 4-14. Timing Roller Removal

Chapter 4 Disassembly/Assembly

98

Page 98
Image 98
Epson N2700 manual Timing Roller Removal