EPSON | Rev. A |
4.2.26 Copying the DIMM Module
The firmware can be copied directly from one DIMM module to another.
1.Insert the DIMM containing the old firmware (target) and the one containing the new firmware (muster) to the sockets A and B, respectively.
2.While holding down the buttons On Line, Alt, and Enter on the control panel, turn the printer on. when the messages “ROM Copy Mode”, press the Enter button. The printer enters the DIMM copy mode.
3.The message “C***** error” appears and the new firmware has been copied.
C A U T IBeforeO N removing/inserting the DIMM, make sure the 
printer power is off. Failure to do so may damage the DIMM.
C H E P O I
If no DIMM is installed in the socket B, the firmware stored in the DIMM module in the PROG socket is copied.
Chapter 4 Disassembly/Assembly | 132 |
