Epson N2700 manual Transfer Unit Removal, Timing Roller Front Sensor Removal

EPSON EPL-N2700 Rev. A

4.2.4.2 Transfer Unit Removal

1.Release two hooks securing the Transfer Unit to the vertical transport door and lift the Transfer Unit a little.

2.Disconnect the harnesses for the Timing Clutch and Timing Roller Front Sensor from the corresponding connectors. Then remove the Transfer Roller Unit from the vertical transport door.

Figure 4-11. Transfer Unit Removal

C A U T ISinceO N the harnesses are short, disconnect the harness holding up the Transfer Unit, and then remove the Transfer Unit.

4.2.4.3 Timing Roller Front Sensor Removal

1.Remove the Transfer Unit. (See Section 4.2.4.2.)

2.From the back of the Transfer Unit, release the hooks securing the Timing Roller Front Sensor to the sensor bracket, then remove the Timing Roller Front Sensor.

Figure 4-12. Timing Roller Front Sensor Removal

Chapter 4 Disassembly/Assembly 96