Epson N2700 Items of restriction on the paper tray, Quantity Printing Menu, Duplex Printing Menu

When “Multibin = Sorter” and “Outbin = Sorter” are selected:

EPL-N2700 Revision A

￿The printer searches some consecutive empty bins in the order of Bin 2, Bin 3 - - -, and paper will be output to the empty bin

￿which found last in the search.

The sequence of ejected paper destination is Bin10 > Bin 9 > - -

￿Bin1.

￿When “Multibin = MultiSort” and “Outbin = Sorter” are selected:

If requested copies is 9 or less, ejection starts at Bin 2. If requested copies is 10 or more, ejection starts at Bin 1, and when all pages are ejected, next ejection starts at Bin3 and then in the following order; 4, 5, - - - 10, and 1.

<Items of restriction on the paper tray>

When the 5-bin or 10-bin is installed:

When the “Out Bin” is set to other than Face-down, “Outbin Select Error” will occur if the printer is in any of the following conditions:

Paper size is any of the A5, B5, GLT, HLT, EXE, MON, C10, DL, C5, or custom.

￿Paper type is other than “Plain”.

“Paper Type” is set to “Transprnc” or “Label”.

NOTE:To check the condition, see the paper source that was selected by the user and also the one from which the paper was fed.

Quantity (Printing Menu)

The number of copies is specified by the job unit. It has a priority over the number set for “Copies”. Accordingly, if “Quantity” is set to “2” or larger, the value set for “Copies” is not effective. This is set with EJL or

ESC/PAGE command. The setting value is not stored in memory. If on- job data is too large to store, the printer shows the warning “Collate was disabled” and prints one set only.

Duplex (Printing Menu)

Selects Single of Duplex printing.

<Items of restriction on the duplex printing>

When the printer is in any of the conditions below, “Can’t Print Duplex” is indicated and printing is disabled.

Paper size is any of the MON, C10, DL, C5, or custom.

￿Paper type is other than “Plain”.

“Paper Type” is set to “Transprnc” or “Label”.

NOTE:To check the condition, see the paper source that was selected by the user and also the one from which the paper was fed.

Offset Stacking (Printing Menu) (TBD)

Turns on or off a use of the shifter when the installed Out Bin has a shifter. Since this selection affects all output devices, it is effective to the Face-down stacker for 5-bin unit. However, if any of the following settings is selected, this function is not effective despite paper is ejected to Bin1 for 5-bin unit:

“Multibin = Stacker” and “Out Bin = Stacker” (for 5-bin unit)

￿“Multibin = Mailbox” “Out Bin = Mailbox1”

Product Description Panel Operation 40