Epson N2700 manual Lower Paper Separator Finger Removal, Upper Paper Eject Roller Removal

EPSON EPL-N2700 Rev. A

4.2.21.5 Lower Paper Separator Finger Removal

1.Remove the Lower Fusing Roller. (See Section 4.2.21.3.)

2.Remove the tension spring fixing the Lower Paper Separator Finger to the Fuser Unit Frame.

Figure 4-51. Lower Paper Separator Finger Removal

4.2.21.6 Upper Paper Eject Roller Removal

1.Remove the Fuser Unit. (See Section 4.2.21.1.)

2.Release the joint for the Fuser Unit Cover and the Fusing Roller Heater Lamp Front Cover.

3.Remove one screw (3501) securing the Fusing Roller Heater Lamp Front Cover to the Fuser Unit Frame Assembly, and remove the Fusing Roller Heater Lamp Front Cover. (See Section 4.2.21.2.)

4.Remove one E-ring (9107) and one torsion spring securing the lever to the rear part of the Fuser Unit and remove the lever.

5.Release the thermistor harness and paper eject sensor harness from the cable clamps in the Fusing Roller Heater Lamp Rear Cover.

6.Remove one screw (3501) securing the Fusing Roller Heater Lamp Rear Cover to the Fuser Unit Frame Assembly and remove the Fusing Roller Heater Lamp Rear Cover.

7.Remove two E-rings (9107) and two bushings fixing the Upper Paper Eject Roller to the Fuser Unit Frame Assembly and remove the Upper Paper Eject Roller.

Figure 4-52. Upper Paper Eject Roller Removal

Chapter 4 Disassembly/Assembly 119