EPSON EPL-N2700

Rev. A

4.2.8 I/C Drive Motor Removal

1.Remove the Rear Cover. (See Section 4.2.6.)

2.Remove four screws (3501) securing the I/C Drive Motor to the printer frame and remove the I/C Drive Motor.

3.Disconnect the harness for the I/C Drive Motor from the connector.

I/C Drive Motor

Motor Harness

Printer Frame

4.2.9 MP Cassette Size Sensor Removal

1.Remove the Rear Cover. (See Section 4.2.6.)

2.Remove the MP Cassette.

3.Remove two screws (3501) securing the cassette size sensor holder to the printer frame, and remove the holder along with the sensor and lever.

4.Disconnect the harness from the connector on the sensor board (PWB-I).

5.Remove the lever from the holder.

6.Remove the sensor board (PWB-I) from the holder.

Figure 4-19. I/C Drive Motor Removal

Figure 4-20. MP Cassette Size Sensor Removal

Chapter 4 Disassembly/Assembly

101

Page 101
Image 101
Epson N2700 manual 8 I/C Drive Motor Removal, MP Cassette Size Sensor Removal