Epson N2700 manual Maintenance by Servicers, After replacing the Fusing Unit, perform Fuser

EPL-N2700 Revision A

6.1.3 Maintenance by Servicers

The units listed in the following table are replaced by the servicers.

Table 6-3. Maintenance by Servicers

Replaced item	Replacement cycle
Fusing Unit	500,000 sheets
Image Transfer Roller Unit	150,000 sheets
Paper Take-Up Roller	120,000 sheets

NOTE:Figures are applicable under the conditions below:

Duty: 5%, A4 LEF, Continuous printing

￿After replacing the Fusing Unit, perform “Fuser

C A U T I O N

Counter Clear” in the maintenance mode. (See ￿Chapter 1 / Section 1.4.5.)

After replacing the Image Transfer Unit, perform “TR

Counter Clear” in the maintenance mode. (See

￿Chapter 1 / Section 1.4.5.)

After replacing the Paper Take-up Roller, perform “MP Counter Clear” and “LC1 Counter Clear” in the maintenance mode. (See Chapter 1 / Section 1.4.5.)

C H E	The grease type used for the Drive Section is
P O I N	MOLYCORT EM-50L. (Do not apply to the Fusing Unit.)

Maintenance Overview 137