Epson N2700 manual Cassette 1 Right Door Set Sensor Removal

EPSON EPL-N2700	Rev. A
4.2.23.7 Cassette 1 Right Door Set Sensor Removal	11. Remove the harness from the connector on the Cassette 1 Right

Door Set Sensor.

1.Take out the Cassette 1.

2.Separate the printer. (See Section 4.2.6.)

3. Remove the tension spring hung to the gear (31T).

3501

4. Remove two screws (3704) securing the bracket for the Cassette 1 Control Board to the Cassette 1 Frame, and remove the bracket. (See Section 4.2.23.5.)

5. Remove one screw (3501) securing the Plate Spring to the bracket and remove the Plate Spring from the bracket.

6. Remove the following screws:

Two screws (3501) securing the solenoid bracket to the Cassette 1 Frame

Four screws (3704) securing the Paper Take-up Mechanism

￿(Shaft Plate, Guide Plate, and Bracket) to the Cassette 1 Frame One screw (3501) securing the rail and Shaft Plate

7.Lift up the Paper Take-up Mechanism and the solenoid bracket.

8.Remove two screws (3501) securing the Solenoid Bracket to the Paper Take-up Mechanism and remove the Solenoid Bracket from the Paper Take-up Mechanism.

9.Remove the stopper fixing the Cassette 1 Right Door Set Sensor to the Solenoid Bracket.

10.Unhook the Cassette 1 Right Door Set Sensor from the Solenoid Bracket and remove the Cassette 1 Right Door Set Sensor.

dis40

Figure 4-66. Cassette 1 Right Door Set Sensor Removal

Chapter 4 Disassembly/Assembly 129