Revision A |
Hex-Dump Mode
Converts received data into hexadecimal ASCII codes. Effective all interfaces.
Button to press: | “Form Feed” while turning on the printer |
Exit: | Switch the printer off or perform |
| by job cancel or reset. |
EEPROM Initialization
Initializes all
Button to press: | “On Line”, “Continue”, and “Menu” while |
| turning on the printer |
CA U T TheI O NTotal Counter, Tray Counter, and transfer Roller
Counter, which are managed by the mechanical controller side, are not initialized.
Panel Setting Initialization
Initializes all panel settings to the factory default values. The printer performs a
Button to press: | “Continue” while turning on the printer |
Exit: | Switch the printer off or perform |
| by job cancel or reset. |
This function initializes all
C A U T I O N
The values such as total printed pages, toner remaining level, paper remaining level, and all items printed on an Engine Status Sheet, which are affected by the printer operation and maintenance operation, are not cleared.
Formatting the Flash ROM Module
This function erases all contents of the flash ROM module attached to the DIMM ROM module A slot on the main board.
Button to press: | “Alt“, “Item“, “Value“, “Enter“ while turning on |
| the printer |
| The printer starts initializing when the |
| message “DIMM A ERASING” appears. |
| When the job is completed, the printer |
| performs a |
| the normal status. |
Updating the Program ROM
This function updates the program DIMM in the program socket on the main board.
Button to press: | “On Line“, “Alt“, and “Value“ while turning on |
| the printer |
Copying the ROM Module
This function copies the contents of the ROM module in the socket B on the main board to the flash ROM module in the socket A. If no ROM module is in the socket B, the contents of the ROM module in the Code ROM socket is copied.
Product Description | Panel Operation | 42 |
