| Revision A |
Adjust
LC1
Shows the adjusting value for the LC1’s main scanning direction. Set by EJL.
LC2
Shows the adjusting value for the LC2’s main scanning
direction. Set by EJL.
LC3
Shows the adjusting value for the LC3’s main scanning
direction. Set by EJL.
MP
Shows the adjusting value for the MP tray’s main scanning
direction. Set by EJL.
Duplex
Shows the adjusting value for the Duplex Unit’s main scanning direction. Set by EJL. (Stage code, Modification management
mode)
MCU:
Shows the mechanical controller version for the printer main body.
Read on the engine side.
LCC:
Shows the mechanical controller version for the Large Capacity
Lower Cassette. Read on the engine side.
Multibin:
Shows the mechanical controller version for the Multibin unit. Read on the engine side.
Error Log:
Shows the record of the most recent 20 errors that occurred. It includes corresponding LCD message, EJL status command, and total sheet number. They are shown in the order of recentness. The error types included are as follows:
Paper Jam
LCC Error Multibin Error
If an error has occurred for the total sheet number with which another error has been already recorded, the new error is not stored.
Product Description | Panel Operation | 46 |
