EPSON | Rev. A |
4.1 Overview
4.1.1 Precaution
Observe the following instruction well before starting servicing.
W A R | Before servicing, turn the printer power off and |
unplug the power code from the AC socket.
Before removing the fuser and nearby parts, turn the printer off and wait for at least 30 minutes to lower the
fuser temperature.
Since the printer weighs 30 Kg, be sure to carry the printer with 2 people.
C A U T IBeforeO N starting servicing, make sure the following points:
Interface cable is disconnected from the back of the printer.
No option is installed on the printer.
Wear the wrist strap to release static electricity so you can avoid damaging static electricity sensitive components.
4.1.2 Tools
The tools used to disassemble/assemble this printer are as listed below:
Table 4-1. Tool List
Name | Availability | Code |
Phillips screw driver | A*1 | B743800100 |
Phillips screw driver | A | B743800500 |
Standard driver | A | B743000100 |
|
|
|
Tweezers | A | B641000100 |
Pillars | A | B740400100 |
|
|
|
*1:A = Available on the market
Chapter 4 Disassembly/Assembly | 88 |
