Remove backing strip Rubber Pads (10), and press onto bottom of Foot Assembly and front edge of Shelf. Thread Shelf Pegs (2) into holes on front edge of Shelf (1). (Fig. 19)
Place CCH1 on top of TV, with Shelf Pegs overlapping front edge of TV, as
| shown in Fig. 20. | Fig. 19 |
|
| |
| Loosen hex screw and slide Leg In or Out until Shelf sits level, then secure |
|
| Leg in position with hex wrench. |
|
| Note: Maximum extension is shown in Fig 20. |
|
| For additional minor adjustments, thread Foot Assembly In or Out of Leg |
|
| until Shelf sits level. Tighten Lock Nut (7) against leg to hold level posi- |
|
| tion. |
|
Fig. 20 | Proceed to section titled Mounting Components to |
|
|
|
Mounting Components to the CCH-1
The
•Center channel speaker
•DVD player
•Cable/Satellite box
•Video game console
•VCR
The primary considerations when mounting a component to the
1.NEVER exceed the maximum weight capacity of 30 lbs. (13.6 Kg)
2. | Make sure that the shelf pegs overlap the front edge of the TV | Fig. 21 |
3. | Place the component all the way to the front of the |
|
Warning: NEVER place component towards rear of shelf, or it may become unstable and tip backwards off of the TV. (Fig 22)
Fig. 22
Installation Instructions
CCH-1:
Center Channel Shelf
•Ideal for center channel speaker or A/V component
•Fits on top of video display
•Variable mounting: fits CRT/LCD/DLP
•All steel construction
•Scratch resistant powder coat finish
•Maximum weight capacity: 30 lbs. (13.6 Kg)
Thank you for purchasing an OmniMount product.
Warranty: Limited Lifetime on manufacturing defects and workmanship.
Specifications are subject to change without prior notice.
Every effort has been made to provide accurate and
OmniMount Systems, Inc.
8201 South 48th Street • Phoenix, AZ
4 | P/N 1002290 — Rev. B 5/2005 | 1 |
Questions?