Omron 705CP-II instruction manual Failure, causes and rectification

705CP-II English

Failure, causes and rectification

Failure and their possible causes					Rectification
Incorrect measurement is indicated by E
1.	A correct reading could not be obtained				1.	Repeat the measurement keeping
	because measurement was disturbed by					perfectly still. Do not move your arm and
	movement of the body.					do not speak.
2.	The cuff is not fitted correctly.				2.	Check that the cuff is correctly fitted.
						Then repeat the measurement.
3.	Your clothing has constricted your				3.	Remove the item of clothing which
	blood flow.					caused the constriction.
4.	There is still air in the cuff when the				4.	The unit may be defective. Please have
	monitor is switched off.					it examined and, if necessary, repaired
						by OMRON.
The (START				) button was pressed	Wait for the ( ) symbol indicating
before the ( ) symbol was displayed.					readiness before you press the (START		)
					button.
The blood pressure values displayed are					Refer to the instructions and then repeat
extremely low or high, or they are					the measurement.
implausible.
The display does not light up when the
(START			) button is pressed.		1.	Check the batteries and, if necessary, fit
1.	The batteries are exhausted.
						4 new batteries.
2.	The +/- poles of the batteries have been				2.	Reinsert the batteries with the +/- poles
	reversed.					the right way round.
3.	The battery contacts are dirty.				3.	Clean the battery contacts with a dry
						cloth.
		The batteries are weak or exhausted.			Fit new batteries.
The cuff pressure does not rise					Check that the air tube is properly
although the pump motor can be heard.					connected to the monitor. Push the tube
					connector firmly into the socket.
		problem with mem. function			Contact your Omron retailer or distributor.
Er
12