How to take a reading
Inflation
Deflation
705CP-II English
Press the (O/I) button.
a)All display symbols appear for approximately one second.
b)When the monitor becomes ready to measure, the (
) symbol appears on the display.
Press the (START
) button and remain still.
As the cuff begins to inflate, the monitor automatically determines your ideal inflation level. Because this monitor detects the pulse even during inflation, do not move your arm but remain still until the entire measurement completes.
•If you want to stop the inflation or measurement, press the (O/I) button. The monitor will stop inflating and start deflating rapidly, then the monitor will turn off.
Inflation stops automatically and measurement is started.
As the cuff slowly deflates, decreasing numbers
appear on the display and the (
) symbol flashes at every heartbeat. In rare circumstances, a higher inflation may be necessary. In those cases, the monitor reinflates the cuff up to 30 mmHg higher than initial inflation and restarts the measurement.
8
